| FINE
WIRE HANDLING KIT |
| For
handling any component with fine wire; ESD
safe. |
| |
Kit
item code |
Description |
| |
C002 |
Conductive
nylon die/small parts handling vaccuum
wand body, NO |
| |
54-4.5 |
ESD
safe slit tip, 4.5 mm wide |
| |
54-6.0 |
ESD
safe slit tip, 6.0 mm wide |
| |
851-L |
Coiled
ESD safe tubing, 4 mm ID, 2 meters
extended |
| |
858 |
Static
dissipative grounding kit for FV10/30/60
pumps |
| |
659 |
Horizontal
desktop stand for NO wand, with vac
shut-off |
| |
FV-60 |
Clean
room vacuum pump, 600 mmHg, 2.5l/min,
HEPA |
|
|
|
| |
| OPTION
1
ESD safe
Teflon wand |
| If
ESD safety is important, check "ESD safe". The wand
and tips will be chosen from suitable conductive materials.
If you would prefer a Teflon wand, which comes with
suitable tips of similar materials, for chemical resistance
perhaps, check "Teflon wand". |
| OPTION
2
Press to release
Press to pick up |
| Our
press-to-release control button draws vacuum continuously
until it is pressed, which may be important if the part
has to be moved a long way, or has to be held for more
than a few seconds. |
| OPTION
3
Desktop
Wall-mount
No Stand |
| Your
wand and its special tip should be kept safe and ready
for use in our simple stand. Please indicate which type
you would prefer. |
| OPTION
4
US (120V-ac)
No Pump (in-house vacuum) |
| The
kit requires a vacuum source, and one of our clean-room
compatible vacuum pumps is included. Please indicate
which voltage you will be connecting to. If you have
a vacuum source available in-house, you may check "no
pump". |
| QUANTITY
DESIRED:
Set(s) |
| Please
enter your name and contact information so we may follow
up with you. NetMotion
tel: (510)440-8040 fax number: (510)440-8043.
|
