Nonmetallic PEEK™ Screws
 
Panhead Phillips (PKP)
Flathead Phillips (PKF)
Hex Head Bolt (PKB)
Allen Head Bolt (CBK)
Hex Head Nut (PKN)
Washer (PKW)
 
Industries and places where PEEK™ are being used
  <<Return to previous page     <<Return to HOME Page
 PEEK™ Metric Screws
 Check to see which best fit your needs. If you have any questions, please call for assistance at 1-800-790-7837 or e-mail sales@netmotion.com
PEEK™ (Polyetheretherketone) screws are extremely stable, chemical, wear and fatigue resistant. NetMotion offers a full range of screws, nuts, and bolts for all your applications. Custom sizes and options are also available.
  • Excellent chemical resistance
  • Excellent hot & water resistance
  • Thermal-shock resistance
  • Wear and fatigue resistant
  • High quality
  • Excellent replacement for nylon, teflon, fiber, and ceramic screws
Why use PEEK™ screws?

If you need a fastener that is virtually non-corrosive, PEEK™ (polyetheretherketone) screws may be a superior substitute for metal components and screws made from other plastics. This highly crystalline thermoplastic maintains its properties under an extreme range of conditions, and it offers good wear resistance, low moisture absorption, and excellent hydrolysis resistance. It withstands high temperature levels, even under sustained pressure, and with a continuous use temperature rating 482°F (250°C), it can be sterilized repeatedly without damage to material . It is also known for its excellent chemical resistance (organic, inorganic solvents, aqueous reagents) and high mechanical strength, including good flexural, tensile, impact and fatigue properties.

If you are looking for injection molded, nonmetallic screws. These "off-the-shelf" fasteners are made with PEEK polymer, a high performance thermoplastic. The screws are ideal for assembling production equipment in semiconductors , and in applications where stainless steel corrodes or other plastics lack sufficient strength.
**Available in - Flat head, Pan head, Hex head, Allen head bolt, Hex head nut, Nut and Washers.

 
Panhead Phillips (PKP) [CAD/PHOTO]
Material: Polyetheretherketone
M M1.7 M2 M2.6 M3 M4 M5 M6 M8
Pitch 0.35 0.4 0.45 0.5 0.7 0.8 1 1.25
DxH 2.5x0.5 3.5x1.3 4.5x1.7 5.5x2 7x2.6 9x3.3 10.5x3.9 14x5.2
L Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg
4 PKP1704 100 PKP204 100
5 PKP205 100
6 PKP206 100 PKP026006 100 PKP306 100 PKP406 100
8 PKP208 100 PKP2608 100 PKP308 100 PKP408 100 PKP508 100
10 PKP210 100 PKP2610 100 PKP310 100 PKP410 100 PKP510 100 PKP610 100
12 PKP212 100 PKP2612 100 PKP312 100 PKP412 100 PKP512 100 PKP612 100
15 PKP315 100 PKP415 100 PKP515 100 PKP615 100 PKP815 100
16 PKP316 100 PKP416 100 PKP516 100
20 PKP320 100 PKP420 100 PKP520 100 PKP620 100 PKP820 100
25 PKP325 100 PKP425 100 PKP525 100 PKP625 100
30 PKP430 100 PKP530 100 PKP630 100 PKP830 100
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
 
TOP    
 
Flathead Phillips (PKF) [CAD/PHOTO]
Material: Polyetheretherketone
M M2 M2.6 M3 M4 M5 M6 M8
Pitch 0.4 0.45 0.5 0.7 0.8 1 1.25
D 4 5.2 6 8 10 12 16
L Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg
4 PKF2604 100
5 100
6 PKF206 100 PKF2606 100 PKF306 100
8 PKF208 100 PKF308 100 PKF408 100
10 PKF310 100 PKF410 100 PKF510 100 PKF610 100
12 PKF312 100 PKF412 100 PKF512 100
15 PKF315 100 PKF415 100 PKF515 100 PKF615 100
16 PKF316 100 PKF416 100
20 PKF320 100 PKF420 100 PKF520 100 PKF620 100
25 PKF325 100 PKF425 100 PKF525 100
30 PKF830 100
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
 
TOP    
 
Hex Head Bolt (PKB) [CAD/PHOTO]
Material: Polyetheretherketone
M M4 M5 M6 M8 M10 M12
Pitch 0.7 0.8 1 1.25 1.5 1.75
BxH 7x2.8 8x3.5 10x4 13x5.5 17x7 19x8
L Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg
8 PKB408 100
10 PKB410 100 PKB510 100 PKB610 100 PKB810 100
12 PKB612 100
15 PKB415 100 PKB515 100 PKB615 100 PKB815 100
20 PKB420 100 PKB520 100 PKB620 100 PKB820 100 PKB1020 50 PKB1220 50
25 PKB425 100 PKB525 100 PKB625 100 PKB825 100 PKB1025 50 PKB1225 50
30 PKB530 100 PKB630 100 PKB830 100 PKB1230 50
35 PKB1035 50 PKB1235 50
40 PKB640 100 PKB840 100 PKB1040 50 PKB1240 50
45 PKB1245 50
50 PKB850 100 PKB1050 50 PKB1250 50
70
Note: PKB850 short screw S=28, PKB1050 short screw S=25
M4 bolt head is slotted for straight screwdriver.
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
 
TOP    
 
Allen Head Bolt (CBK) [CAD/PHOTO]
Material: Polyetheretherketone
M M3 M4 M5 M6 M8
Pitch 0.5 0.7 0.8 1 1.25
DxH 5.5x3 7x4 8.5x5 10x6 13x8
B 2.5 3.0 4 5 6
L Item Pkg Item Pkg Item Pkg Item Pkg Item Pkg
6 CBK306 100 CBK406 100
8 CBK308 100 CBK408 100 CBK512 100
10 CBK310 100 CBK410 100 CBK510 100 CBK610 100 CBK810 100
12 CBK312 100 CBK412 100 CBK512 100 CBK612 100 CBK812 100
15 CBK315 100 CBK415 100 CBK515 100 CBK615 100 CBK815 100
20 CBK320 100 CBK420 100 CBK520 100 CBK620 100 CBK820 100
25 CBK525 100 CBK625 100 CBK825 100
30 CBK630 100 CBK830 100
40 CBK640 100 CBK840 100
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
 
TOP    
 
Hex Head Nut (PKN) [CAD/PHOTO]
Material: Polyetheretherketone
M M2 M2.6 M3 M4 M5 M6 M8 M10 M12
Pitch 0.4 0.45 0.5 0.7 0.8 1 1.25 1.5 1.75
BxH 4x1.6 5x2 5.5x2.4 7x3.2 8x4 10x5 13x6.5 17x8 19x10
Item PKN2 PKN26 PKN3 PKN4 PKN5 PKN6 PKN8 PKN10 PKN12
Pkg 100 100 100 100 100 100 100 100 100
 
Washer (PKW) [CAD/PHOTO]
Material: Polyetheretherketone
M 2 2.6 3 4 5 6 8 10 12
dxD 2.1x4 2.7x6 3.2x7 4.3x9 5.3x10 6.4x12.5 8.4x17 10.5x21 13x24
t 0.5 0.5 0.5 0.8 1 1.6 1.6 2 2.5
Item PKW2 PKW26 PKW3 PKW4 PKW5 PKW6 PKW8 PKW10 PKW12
Pkg 100 100 100 100 100 100 100 100 100
 
--NOTES--
*Production method is different from metal screws, so some variation is normal. All products are in accordance with JIS and ISO standards.
*Mechanical Characteristics are reference values only. Some variance in actual use is normal.
*Please tighten to measured torque values.
*Chemical resistance may vary with temperature. Be sure to evaluate under conditions of actual expected use.
*For best results in compression applications, it is strongly recommended that PEEK(R) screws be used in conjunction with PEEK(R) nuts.
*When PEEK(R) screws are used in threaded holes without nuts, the contact surface should be less than 20mm.
*Specification subject to change without notice.
*Custom orders available by separate arrangement.
TOP    
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
Click here to request for NetMotion catalogs with complete list of products:
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510-578-2814 or e-mail sales@netmotion.com
Copyright © 2007 NetMotion, Inc.
7