Servo Motors, DC Motors, Motors with Worm Gear, Motor with Spur Gear, Motor with No Gearing, No Gear Motor
<<Return to previous page
Medical Applications Office & Copy Machine Applications
Smart Building Concepts Applications Other Applications
Catering & Agricultural Applications
Distribution Applications
Conversion Information Advisory
 <<Return to previous page
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2811 or e-mail sales@netmotion.com
SWMK 403.347 DC Motor with Worm Gear for Medical Bath Lift
The motor casing and the rear motor bearing plate consist of Sendzimir-galvanized sheet steel, the shell magnets are made of sintered metal material and the gearbox is a zinc die-casting.

The armature shaft has a sintered metal bush bearing on the motor side, and the gear side bearing, mounted in the bottom of the gearbox, is either a ball bearing or also a sintered metal bush bearing.

The worm wheel is made of plastic or resinbonded fabric or bronze and the shaft runs in a sintered metal bush bearing.

The grease-filled gearbox is sealed by means of a sheet steel cover and seal.

Electrical connection is carried out by means of leads or spade terminals.
 
Technical Data
Rated Voltage UN [Volt] 12
No-load Speed n0 [min-1] 33
Nominal Torque MN [Nm] 3,50
ON time %
ON [min]
Starting torque MA [Nm] 17,00
Gear ratio 69:1
Armature resistance, 2 bars R [m] 840,00
  4 bars R [m] 730,00
Armature Inductance, 2 bars L [mH] 1,18
  4 bars L [mH] 1,04
Armature load inertia JR [kgm2] x [10-6] 58,00
Gear wheel material plastic
Hall IC
 Pulses/ rev. drive shaft
 Output channels  
Remarks without bearing cover
Enclosure Class IP 30
Weight [kg] 1.2 kg
 
Shaft Wiring Diagram
 
Drawing Connection
 
Characteristic Curve
 
 Order by clicking on the bottom:
 
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2811 or e-mail sales@netmotion.com
Copyright © 2003 NetMotion, Inc.