| P3 series
(low inertia) |
 |
The
P3 Series (servo motor) and the PV series (servo amplifier)
systems, which features low inertia and high power cahracteristics,
are suitable for PTP control of light loads. Sanyo-Denki has
successfully reduced their acceleration time and increased the
speed of these systems to a maximum of 4,500 min-1, making them
suitable for machines and equipment that demand high speed repetition.
|
|
 |
Low
inertia, High power rate motor best suited for high response
applications with light loads. |
|
Maximum
rotating speed = 4500/min. |
|
Simple
robots, Semiconductor manufacturing, Mounters, Inserters, Wafer
transfer |
|
| |
| Features:
|
| •
Ultra-small servo motors to meet the growing demand for downsizing |
| P3 motors
have been compactly deisigned and are almost half the size of
our conventional models |
| •
Low inertia and high power rate |
| The P3
servo motor lineup includes 6 models ranging from 30W to 750W
featuring low inertia and high-power rate. They are most suitable
for high response applications under light load and low machine
inertia. |
| •
High-speed servo |
| Thanks
to a maximum speed of 4,500 min-1,
positioning time can be shortened considerably. |
| •
Save-wiring Encode |
| The standard
equipped save-wiring incremental encoder greatly facillates
wiring work. |
| •
Water protection |
| The standard
specification is without water protection. Contact our sales
division when specific water protection is required. IP40: standard
waterprotection for all models (IP55: Optional). |
| •
Oil seal |
| The standard
specification is without oil seal. Contact our sales division
when an oil seal is required. |
| •
Shaft |
|
| Straight
shafts are the standard specification. Contact our sales division
when D-cut or keyed shafts are required. |
|
| Application
include: |
| • Small,
Simple structure robots |
| • Wafer
Carriers |
| • Chip mounters |
| • General-purpose
machines |
| Click
here for amplifiers |
| AC servo motors
and amplifiers selection chart |
| |
AC
Servo Motor
