| Proximity Sensors |
| D4MC:
Economical, General-Purose, Enclosed Switch |
| SHL:
Subminiature Enclosed Switch |
  |
| Click
here for sample applications |
| |
| D4MC: Miniature
Enclosed Limit Switch |
| Economical, General-Purose,
Enclosed Switch |
 |
- High precision and long
life (10,000,000 mechanical operations)
- Gasket diaphram seal
provides high environmental resistance
- Suitable for applications
demanding higher mechanical strength,
dustproof and drip-proof properties
- Pre-wired types with
molded terminals are available on special
request
|
|
| Part# |
Actuator Type |
Contact Configuration |
Switching
Capacity |
Termination
Configuration |
| D4MC-1000 |
Hinge Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-1020 |
Short Hinge Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-2000 |
Hinge Roller
Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-2020 |
Short
Hinge Roller Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-3030 |
One-Way
Action Short Hinge Roller Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-5000 |
Panel Mount Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-5020 |
Panel Mount Roller
Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| D4MC-5040 |
Panel Mount Crossroller
Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
|
| |
| SHL: Subminiature
Enclosed Limit Switch |
| Subminiature Enclosed Switch |
 |
- Coil-spring switch housed
in rigid zinc diecast alloy boasts long
life and high precision
- Requires nearly the same
operating force as a conventional precision
switch (0.53 to 0.88 lbf)
- Molded terminal model
is available UL, CSA and/or EN (IEC) approvals
- Operation-indicator models
are available
|
|
| Part# |
Actuator Type |
Contact Configuration |
Switching
Capacity |
Termination
Configuration |
| SHL-D55 |
Plain Top Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-Q-2255-01 |
Panel Mount Roller
Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-Q2155 |
Panel Mount Crossroller
Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-Q2255 |
Panel
Mount Roller Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-Q55 |
Panel Mount Plunger |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-W155 |
Hinge Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-W2155 |
Hinge Roller
Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-W255 |
Short Hinge Roller
Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-W355 |
One-Way Action
Short Hinge Roller Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
| SHL-W55 |
Short Hinge Lever |
SPDT |
10A, 125 VAC |
Screw Terminal |
|
| Few
Sample Applications: |
| The connector
is connected to the limit switch, and is attached
to the intermediate box by means of the box
nipple, ensuring sealability from the switch
up to the intermediate box. |
 |
| The connector is connected
to the limit switch, flexible piping is provided
only at locations subject to splashing by
cutting fluid and chips, and the end of the
conduit tube is capped by terminal cap and
is open. |
 |
|
|
|
|
|
