Stepper Motors - Intelligent Motors, Motor Driver Combination, Motor Controller Combination
<<Return to previous page
Miniature/ Micro Motors & Gearbox 2ph Stepper Motors
Specialty/ Slim Line Motors 3ph Stepper Motors
Intelligent Motors (integrated Solutions) 5ph Stepper Motors
 
Servo vs Stepper Motors & much more... Sample applications & much more...
  <<Return to previous page     <<Return to HOME Page
 Intelligent Motors  - Integrated Step Motor & Controller Solution
 Check to see which best fit your needs. If you have any questions, please call for assistance at 1-800-790-7837 or e-mail sales@netmotion.com
SilverPak Integrated Step Motor & Driver Solutions
SimpleStep Integrated Step Motor & Controller Solutions
SilverPak 17 Integrated Stepper Motor and Driver
 
Technical Specifications
Steps per revolution: 200, 400, 800, and 1600
Current 1.4 Amp RMS 2.0 peak
Voltage from 12 to 24 VDC

Maximum Step Frequency 250 kHz
Minimum Step Pulse Width 20 microseconds
Minimum Step Low Time 20 microseconds
Maximum Power-Down Recovery Time 20 milliseconds
SilverPak Integrated Motor & Driver Solution

Features

  • Step & Direction Input
  • A NEMA size 17, 2 phase, 1.8º bipolar step motor ...with built-in microstepping driver
  • Selectable step resolution from full step to 8X ...microsteps
  • Optically isolated step, direction, and disable/ ...enable inputs
  • Automatic current reduction with disable switch
  • Operates on 12 to 24 VDC
  • Low power dissipation
  • Efficient current control
  • Quiet operation
  • Thermal shutdown
  • Power-on indicator
  • Power disable/enable control
  • Up to 85 oz-in of holding torque
 
A. Connectors
A DB-9 male connector provides power and control connections. Mating connector provided.
B. Motor Front Shaft Extension Length
Standard length is 0.94". Customized lengths available.
C.Motor Shaft Diameter
Standard shaft diameter is 0.1968". Customized diameters available.
D. Overall Body Lengths
Multiple body lengths available:
. Model 4118S (2.69")
. Model 4118M (2.92")
. Model 4118L (3.24")
 
SilverPak Manual
 
 
Click below to request for a quotation:
   
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or e-mail sales@netmotion.com
 
SimpleStep 17 Integrated Step Motor & Controller
 
Technical Specifications
Steps per revolution:
200, 400, 800, 3200, 6400, and 12800
Current
up to 1.5 Amp/phase (peak)
Voltage
from 12 to 40 VDC
Maximum Step Frequency
10 kHz
SimpleStep Integrated Step Motor & Controller Solutions

Feartures

  • Single 4 wire bus linking up to 15 step motors
  • 1.5 Amp chopper (PWM) driver
  • Operates from 12V to 40V
  • RS232 or RS485 based communications
  • Stand alone operation with no connection to a PC
  • Execution halt pending switch closure
  • Up to 64 microstep resolution
  • Industry standard communications protocol
  • Homes to an opto or switch closure with a ...single command
  • Fully programmable ramps and speeds
  • Two digital I/O and two fixed input channels
  • Switch selectable address
  • Software selectable "Move" and "Hold" currents
  • Hold current automatically selected upon move completion
  • Up to 85 oz-in of holding torque
  • Simple DB9 connection
 
A. Connectors
A DB-9 male connector provides power and control connections. Mating connector provided.
B. Motor Front Shaft Extension Length
Standard length is 0.94". Customized lengths available.
C.Motor Shaft Diameter
Standard shaft diameter is 0.1968". Customized diameters available.
D. Overall Body Lengths
Multiple body lengths available:
. Model 4118S (2.69")
. Model 4118M (2.92")
. Model 4118L (3.24")
 
Simple Step Manual
Quick Reference Guide - HyperTerminal
Quick Reference Guide- Windows Apps.
Windows App. Examples
Simple Step Commands
Click below to request for a quotation:
   
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2811 or e-mail sales@netmotion.com
Copyright © 2003 NetMotion, Inc.