Stepper Motor Drivers
<<Return to previous page
2 Phase Unipolar Stepper Motor Drivers
2 Phase Bipolar Stepper Motor Drivers
3 Phase Stepper Motor Drivers
5 Phase Stepper Motor Drivers
Miniature Stepper Motor Drivers
 
How to select the right motor driver & much more... Motor driver applications
<<Return to previous page
 5 Phase Stepper Motor Drivers
 Check to see which best fit your needs. If you have any questions, please call for assistance at 1-800-790-7837 or e-mail sales@netmotion.com
5 Phase Stepper Motor Drivers
Model Stepping
RD-053N Full & Half Step
RD-A051 Full & Half Step
RD-053MS Microstep
Sanyo-Denki Sanyo Denki Drivers
 
RD-053N
Download Step Motor Driver Manuals
Specifications Description Wiring Diagram
Features:
  • Better Resolution
  • Lower Vibration
  • More Torque
RD-053N Specifications
Supply Voltage:   Single 18-40 VDC
Supply Current:   Approx. 2 times rated coil current per phase
Motor Current:   0.5-3A/ Phase
Excitation Method:   Full step/ Half Step (4ph or 4-5ph)
Drive Method:   Biipolar, constant current chopper method with standard wiring
Auto Current Limiting:   1/2 of full current while holding
Protective Circuitry:   Overheat, low voltage, motor miswiring protection (within 10 minutes)
Outside Dimensions:   2.5"H x 4.1"W x 2.2"L
  (65H x 105W x56D mm)
Weight:   550g (19.4 oz.)
Accel., Decel. time:   15-1500ms by potentiometer
RD-053N Description
Compared to 2-ph stepmotors, 5-ph stepmotors can achieve more torque at higher speeds with less vibration. NeMotion's 5-phase drivers were designed to maximize such motors' capabilities.
Specifications Description Wiring Diagram
Click below to request for a quotation:
  
 
RD-A051
Download Step Motor Driver Manuals
Specifications Descriptions Wiring Diagram Dimensions  
Features:
  • Built-in Power Supply
  • High Voltage Capability
  • Anti-Resonance Circuit
  • 1.6 inch thin!
RD-A051 Specifications
Supply Voltage: 110 VAC
Supply Current: 4A max.
Motor Current: 0.3-1.3A/ Phase
Excitation Method: 5-pair wiring
Auto Current Limiting: 1/2 of full current when motor is stationary
Oscillation Frequency: 200 KPPS max.
Protective Circuitry: Overheat and low voltage protection
Isolation: Up to 1000V
Dimensions: 3.2"H x 1.6"W x 6.1"D
  (80H x 40W x155D mm)
Weight: 1.0kg (5.29 oz.)
RD-A051 Description

   The RD-A051 meets the motion control needs of customers with high voltage, 1-2 axis applications. Though it is compact (only 1.6" wide), this 5-phase driver has a built-in power supply so that a DC source is not needed. It also has an anti-resonance circuit which helps to eliminate midrange instability.
  
Additonal feature include selectable clock (1 or 2 clock inputs) and isolated inputs and outputs (photo-coupler).

Specifications Descriptions Wiring Diagram Dimensions
Click below to request for a quotation:
  
 
RD-053MS
Download Step Motor Driver Manuals
Specifications Description Wiring Diagram
Features:
  • Selectable Microstep
  • High Resolution
  • High Torque
  • High Speed
  • Lower Vibration
  • Adjustable Idle Current
RD-053MS Specifications
Supply Voltage:   Single 18-40 VDC (including ripple)
Supply Current:   Approx. 2 times rated coil current
Motor Current:   0.3-3.0A/ Phase
Microstep Resolution:   Up to 400 microsteps/step
1, 2, 4, 8, 16, 32, 64
2.5, 5, 10, 20, 40, 80, 160, 320
6.25, 12.5, 25, 50, 100, 200, 400
Excitation Method:   Microstep or full step
Drive Method:   Constant current chopper method
Auto Current Limiting:   0~80% of rated motor current
Protective Circuitry:   Motor miswiring, overheating, and low voltage protection
Outside Dimensions:   2.5"H x 2.2"W x 4.1"L
  63H x 56W x105Lmm)
Weight:   550g (19.4 oz.)
Oscillating Frequency::   500 kpps
RD-053MS Description

   RD-053MS combines microstepping with 5-phase capability in one ultracompact, state-of-the-art step motor driver. Using such a 5-phase microstep driver/motor combination greatly reduces torque ripple with virtually no resonance effects.
 
RD-053MS features selectable microstepping of up to 400 microsteps per step (22 selections). Motor rotation can be changed for microstep to full step or vice versa on the fly. The unit accepts pulse and direction inputs or two clock inputs, one for each direction.

Specifications Description Wiring Diagram
Click below to request for a quotation:
  
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2811 or e-mail sales@netmotion.com
Copyright © 2003 NetMotion, Inc.