|
| Check below if you know the
model(s) you are looking for: |
|
|
| |
| RD-122
Driver with Built-in Oscillator |
| Download
Step Motor Driver Manuals
|
|
|
 |
Features:
- Ultra
Compact
- Built-in
Oscillator
- Simple
On/Off Speed Control
- Rugged
|
|
| RD-122
Specifications |
| Supply
Voltage: |
|
Single
18-40 VDC |
| Supply
Current: |
|
2.4
times rated coil current per phase |
| Motor
Current: |
|
0.3-1.3A/
Phase |
| Excitation
Method: |
|
Full
step (2P) |
| Drive
Method: |
|
Unipolar,
constant current chopper method |
| Auto
Current Limiting: |
|
1/2
of full current when motor is stationary |
| Protective
Circuitry: |
|
low
voltage and motor miswiring |
| Outside
Dimensions: |
|
1.1"H
x 4.1"L x 2.2"D |
| |
|
(27.5H
x 105W x56D mm) |
| Weight: |
|
250g
(8.8 oz.) |
| Oscillating
Frequency: |
|
30pps
- 7kpps |
| Speed
Selection: |
|
High/Low |
| Accel.,
Decel: |
|
200-2000ms
by pot adjustment |
|
|
|
Click
below to request for a quotation:
|
| RD-022/
RD-022N Driver |
| Download
Step Motor Driver Manuals
|
|
|
 |
Features:
- Ultra
Compact
- Simple
On/Off Speed Control
- Rugged
|
|
| RD-022/
RD-022N Specifications
|
| Supply
Voltage: |
|
Single
18-40 VDC |
| Supply
Current: |
|
2.4
times rated coil current per phase |
| Motor
Current: |
|
0.3-1.3A/
Phase |
| Excitation
Method: |
|
Full
step (2P) or Half step (1-2P) |
| Drive
Method: |
|
Unipolar,
constant current chopper method |
| Auto
Current Limiting: |
|
1/2
of full current when motor is
stationary |
| Protective
Circuitry: |
|
low
voltage and motor miswiring |
| Outside
Dimensions: |
|
1.1"H
x 4.1"L x 2.2"D |
|
|
(27.5H
x 105W x56D mm) |
| RD-022
Pulse Input:: |
|
CW/CCW
with optocoupler |
| RD-022N
Pulse & Dir. Input:: |
|
CW/CCW,
CLOCK with optocoupler |
|
|
Click
below to request for a quotation:
|
|
|
|
| RD-323MS |
| Download
Step Motor Driver Manuals
|
|
|
 |
Features:
- Selectable
Microstep (50, 64, or 80)
- High
Resolution
- Lower
Vibration
- Selectable
clockout for counters
- Variable
speed control via joystick
- Adjustable
idle current
|
|
RD-323MS
is a state-of-the-art, high resolution step
motor driver featuring selectable microstep
(50, 64, or 80 microsteps/step). The unique
feature of this driver is its user-selectable
clockout for 1~80 microsteps/step. The pulse
output to the motor is always in microstep
pulses, irrespective of the clockout. This
feature makes it an excellent stepmotor driver
for use with Programmable Logic Controllers
(PLCs) or other controllers with inexpensive
high speed counters.
The
driver accepts inputs for start, direction
and speed to activate the unit's internal
voltage-controlled oscillator (VCO). This
feature is very useful for building simple
systems using a joystick or any controller
with parallel I/Os.
The
unit is equipped with high-precision, current
regulation circuitry that can be adjusted
between 0.3~1.5 or 0.3~3A/ph to provide better
current control. Idle current is adjustable
to reduce motor and driver heat generation. |
| RD-323MS
Specifications |
| Supply
Voltage: |
|
Single
18-40 VDC (including ripple) |
| Supply
Current: |
|
Approx.
2 times rated coil current per phase |
| Motor
Current: |
|
0.3-3.0
A/ Phase |
| Microstep
Resolution: |
|
50,
64, or 80 (µstep/step) |
| Clockout
Resolution: |
|
1~80
microstep/step |
| Excitation
Method: |
|
Microstep |
| Drive
Method: |
|
Unipolar,
constant current chopper method |
| Auto
Current Limiting: |
|
0
~ 80% of rated motor current |
| Protective
Circuitry: |
|
Motor
miswiring, overheating, and low voltage
protection |
| Outside
Dimensions: |
|
1.1"H
x 2.2"W x 4.1"L |
| |
|
(26H
x 56W x 105Lmm) |
| Weight: |
|
250g
(8.8 oz.) |
| Oscillation
Frequency: |
|
600
kpps |
| Accel.,
Decel. Time: |
|
20~3000ms
by pot setting |
| Position
Repeatability: |
|
±
1 microstep with no load in one direction |
| Accuracy
(Electrical):: |
|
±
2% (± 1 microstep under 50 µstep) |
|
|
|
Click
below to request for a quotation:
|
| RD-023MS |
| Download
Step Motor Driver Manuals
|
|
|
 |
Features:
- Selectable
microstep (22 selections)
- High
resolution
- Lower
vibration
- Adjustable
idle current
|
|
|
RD-023MS
is a state-of-the-art, high resolution,
step motor driver featuring selectable microstepping.
The user selects from 1~400 microsteps per
step using dip switches (22 selections).
The
unit accepts pulse and direction inputs
or two clock inputs, one for each direction.
It is equipped with opto-isolated inputs
and outputs to provide maximum noise immunity.
It
is also equipped with high-precision, current-regulation
circuitry that can be adjusted to 0.3~1.5
or to 0.3~3 A/ph to provide better current
control. Idle current is adjustable as well
to reduce motor and driver heat generation.
Motor
rotation can be changed from microstep to
full step or vice versa on the fly.
|
| RD-023MS
Specifications |
| Supply
Voltage: |
|
Single
18-40 VDC (including ripple) |
| Supply
Current: |
|
Approx.
2 times rated coil current per phase |
| Motor
Current: |
|
0.3-3.0
A/ Phase |
| Microstep
Resolution: |
|
Up
to 400 microsteps/step (µstep/step) |
| Selections:
1, 2, 4, 8, 16, 32, 64, 2.5, 5, 10,
20, 40, 80, 160, 320, 6.25, 12.5, 25,
20, 100, 200, 400 |
| Excitation
Method: |
|
Full
step or microstep |
| Drive
Method: |
|
Unipolar,
constant current chopper method |
| Auto
Current Limiting: |
|
0
~ 80% of rated motor current |
| Protective
Circuitry: |
|
Motor
miswiring, overheating, and low voltage
protection |
| Outside
Dimensions: |
|
1.1"H
x 2.2"W x 4.1"L |
| |
|
(26H
x 56W x 105Lmm) |
| Weight: |
|
250g
(8.8 oz.) |
| Oscillation
Frequency: |
|
500
kpps |
| Position
Repeatability: |
|
±
1 microstep with no load in one direction |
| Accuracy
(Electrical):: |
|
±
2% (± 1 microstep under 50 µstep) |
|
|
|
|
|
|
TOP
of the PAGE |
|
|
Click
below to request for a quotation:
|
| For
further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2811
or e-mail sales@netmotion.com
|
| Copyright © 2003 NetMotion,
Inc. |
|
