  
|
| Check below if you know the model(s) you are looking
for: |
| |
| Download
Step Motor Controller Manuals
|
| |
| |
ARCUS PERFORMAX SERIES PRODUCT SUMMARY CHART |
ARCUS PERFORMAX USB PART NUMBER |
| |
1EX |
1CD |
2EX |
2ED |
4EX |
4CX |
DIO |
AIO |
Features |
1 |
1 |
2 |
2 |
4 |
4 |
|
|
Number of Axis |
6M |
400K |
6M |
400K |
6M |
400K |
|
|
Maximum Speed |
|
|
√ |
√ |
√ |
|
|
|
Linear Interpolation |
√ |
|
|
|
|
|
|
|
StepNLoop® Closed Loop Control |
|
|
√ |
√ |
|
|
|
|
Joystick Control |
√ |
|
√ |
√ |
√ |
|
|
|
Encoder Inputs |
√ |
|
|
|
|
|
|
|
Latch Inputs |
|
|
8 |
8 |
8 |
4 |
8 |
|
Digital Inputs |
|
|
8 |
8 |
8 |
4 |
8 |
|
Digital Outputs |
|
|
2 |
2 |
|
|
|
8 |
Analog Inputs |
|
|
|
|
|
|
|
2 |
Analog Outputs |
|
√ |
|
2 |
|
|
|
|
Integrated Bipolar Drivers |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
USB 2.0 |
|
 |
|
| |
| Check below if you know the model(s) you are looking for: The thumbnail of the entire Arcus Products |
|
| |
| Arcus Performax Series - Compact USB 2.0 Motion/IO Controllers |
| Performax USB 2.0 controller modules are compact, comprehensive, capable, and cost-effective controller modules ideal for PC based control system. Click here to download brochure (PDF - 968kb) |
PERFORMAX 1EX
Single Axis Advanced Stepper Motion |
 |
Motion Control Features
6M maximum pulse rate output
S-curve/Trapezoidal acceleration profile
Quadrature encoder inputs A/B/Z
StepNLoop® closed loop control
On-the-fly speed change
High speed position latch input
Electrical Specifications
Open-collector pulse/dir/enable/ DO outputs
Differential/Single-ended encoder inputs
USB bus powered |
Communication
USB 2.0 communication
Dimensions
1.6 x 1.6 x 0.875 inches
Accessories
PCC-18D: Connector/Cable Set
PJB-EX: Screw Terminal Junction Board
→ go to top |
|
|
PERFORMAX 1CD
Single Axis Stepper Motion Controller / Driver Combination |
 |
Motion Control/Driver Features
400K maximum pulse rate output
Trapezoidal acceleration profile
Integrated bipolar driver
Software configurable current upto 1.5A
Software configurable micro step from full to 1/8
Automatic current reduction in idle mode
Electrical Specifications
Opto-isolated +L/-L/H inputs
+12-24VDC power input
USB bus powered
Options
MCD: Integrated Performax CD and NEMA 17/23 motor series |
Communication
USB 2.0 communication
Dimensions
1.6 x 1.6 x 0.875 inches
Accessories
PCC-2S8S: connector/cable set for CD
PCC-2S4S: connector/cable set for MCD
→ go to top |
|
|
PERFORMAX 2EX
2-Axis Advanced Stepper Motion Controller |
|
Motion Control Features
6M maximum pulse rate output
S-curve/Trapezoidal acceleration profile
Quadrature encoder inputs A/B/Z
Linear Interpolation
XY Joystick control using 2 analog inputs
Electrical Specifications
Opto-isolated +L/-L/H inputs
Open-collector pulse/dir/enable
8 opto-isolated digital inputs
8 opto-isolated digital outputs
2 channels of 10 bit analog inputs |
Communication
USB 2.0 communication
Dimensions
5.0 x 4.1 x 1.2 inches
→ go to top |
|
|
PERFORMAX 2ED
2-Axis Advanced Stepper Motion Controller / Driver |
|
Motion Control Features
400K maximum pulse rate output
S-curve/Trapezoidal acceleration profile
Quadrature encoder inputs A/B/Z
Linear Interpolation
XY Joystick control using 2 analog inputs
Electrical Specifications
Opto-isolated +L/-L/H inputs
8 opto-isolated digital inputs
8 opto-isolated digital outputs
2 channels of 10 bit analog inputs
USB bus powered
Stepper Driver Features
Dual bi-polar stepper driver integrated with the controller
Selectable current to 1.5A Max
Selectable micro step Full, 1/2, 1/4, 1/8 |
Communication
USB 2.0 communication
Dimensions
5.0 x 4.1 x 1.2 inches
→ go to top |
|
|
PERFORMAX 4EX
4-Axis Advanced Stepper Motion Controller |
|
Motion Control Features
6M maximum pulse rate output
S-curve/Trapezoidal acceleration profile
Quadrature encoder inputs A/B/Z
Continuous 32 buffered XYZ interpolated moves
Electrical Specifications
Opto-isolated +L/-L/H inputs
Open-collector pulse/dir/enable outputs
8 opto-isolated inputs
8 opto-isolated outputs
USB bus powered |
Communication
USB 2.0 communication
Dimensions
5.0 x 4.1 x 1.2 inches
→ go to top |
|
|
PERFORMAX 4CX
4-Axis Stepper Motion Controller |
|
Motion Control Features
400K maximum pulse rate output
Trapezoidal acceleration profile
Electrical Specifications
Opto-isolated +L/-L/H inputs
Open-collector pulse/dir/enable outputs
4 opto-isolated inputs
4 opto-isolated outputs
USB bus powered |
Communication
USB 2.0 communication
Dimensions
5.0 x 4.1 x 1.2 inches
→ go to top |
|
|
PERFORMAX DIO
Digital Input / Output Controller |
|
Electrical Specifications
8 Opto-isolated inputs
8 Opto-isolated Darlington outputs 100mA sink capable
Accessories
PCC-18D: connector/cable set
PJB-DIO: screw terminal junction board |
Communication
USB 2.0 communication
Dimensions
1.6 x 1.6 x 0.875 inches
→ go to top |
|
|
PERFORMAX AIO
Analog Input / Output Controller |
|
Electrical Specifications
8 Analog inputs 10 bit 0-5VDC input
2 Analog outputs 8 bit 0-5VDC output
Accessories
PCC-14D: connector/cable set
PJB-AIO: screw terminal junction board |
Communication
USB 2.0 communication
Dimensions
1.6 x 1.6 x 0.875 inches
→ go to top |
|
Click below to request for a quotation:
|
|
|
|
 Solustan
LM Series - Virtual Motion Controllers |
LinkMotion is
a revolutionary new product from Solustan, which guarantees
to save you time and money . LinkMotion is a driver which allows
you to completely rid yourself of any propietary software or
hardware. All you need is your standard, 3-axis machine, and
a Windows-based computer; our innovative solution will take
care of the rest!
How Does it Work?
How does a driver help you? For a simple example think about
how your printer works. It doesn't matter what application you
are using on your computer, you can always print to your printer.
Whether its from your text editor, your web browser, your email
program, or virtually any other application, you can always
send documents out to your printer. This is because you have
installed a 'driver' for your printer, that all programs can
utilize. Shouldn't everything be this easy? Now, with Solustan's
LinkMotion technology, it is.
|
|
| System
Requirements |
| Windows XP |
| 800 MHz Processor Speed |
| 512MB RAM Memory |
| 25MB Disk Space |
| Parallel or USB Port |
| CD-Rom Drive |
|
|
|
| |
| Compatibility
- Software |
| Coral Draw |
| AutoCAD |
| Adobe Illustrator |
| AutoCAD LT |
| GenericCAD |
| DesignCAD & more... |
|
|
|
| Hardware |
| Any machine without a controller
|
| Machines with controller that can
accept G-Codes |
| Machines with controller that can
accept HPGL commands |
|
|
|
| |
| Available
Versions |
| LM200 |
LinkMotion
Virtual Controller Driver |
Eliminates
the need for a proprietory controller |
| LM300 |
LinkMotion
Virtual Controller Driver for CO2 Laser machines |
Laser machines
without controllers |
| LM100G |
LinkMotion
G-Code Driver |
Creates
G-Codes for processing by an existing controller |
| LM100H |
LinkMotion
HPGL Driver |
Creates
HPGL codes for processing by an existing controller |
| LM400 |
LinkMotion
for Motion Control Boards |
LinkMotion
for Galil MCB |
|
|
| |
| Yesterday's
Process |
| CNC
Machine World |
 |
| Engraving/
Marketing Machine World |
 |
| New
Age Solution |
 |
|
|
Click below to
request for a quotation:
|
|
All
you need to know about stepper motor controllers &
much more... |
| |
| Rorze
RC207A StepMotor
Controller |
| |
 |
Features:
- All
RC-204 Commands
- Stand-alone
Capability
- Ease
of Programming
- No
Battery Back-up Required
- Selectable
Baud Rate
|
Additional
Features:
- Echo
Back
- Jump
Routines
- Flag
Settings
- Counters
- Timer
|
|
| RC207A
I/O Master Stand-Alone Controller |
| I/O
Master model RC207A extends and enhances the features
of its predecessor- the RC-204. It can operate stand-alone,
thereby reducing the space and cost of a system, and
it has additional features and commands which simplify
programming and increase its capabilities.
Programming can be done at the command level
(rather than in assembly language). |
|
| RC20A
Specifications |
| Supply
Voltage: |
|
Single
18-40 VDC |
| Power
Consumption: |
|
Less
than 20 milliamp at 24VDC |
| Clock
Response: |
|
100KPPS
max. |
| Setting
Position Data: |
|
0-99,
999 |
|
Position Data Memory: |
0-16,
777, 215 |
| Memory
Capacity: |
8K
EEPROM |
| 8K
bytes SRAM |
| |
|
32K
bytes PROM |
| Number
of Profiles: |
|
1,130
Points |
| Ports: |
|
|
|
Input: |
|
20
+ clock |
| Output: |
|
16 |
| Control
Signal IN: |
|
3 |
| Control
Signal OUT: |
|
3 |
| Control
Signal Line: |
|
Current
loop method of RS-232C to be used with RC-002 Link Master.
Baud rate 9600 bps; 8 bit, no parity, one-stop bit. |
| Outside
Dimensions: |
|
1.1"H
x 4.1"L x 2.2"D |
| |
(27.5H
x 105L x56D mm) |
| Recommended
Drivers: |
|
RD-100
and 300 series |
|
Click below
to request for a quotation:
|
| |
| Rorze
RC234 Stepper
Motor Controller |
| Download
Step Motor Controller Manuals
|
| |
 |
Features:
- S-curve
acceleration provides smooth moves without a shock
or damping
- Asummetrica
S-curce accel/decel control is available
- Closed
loop control when used with an encoder for accurate
positioning
- Stand-alone
operation and control from PLC are available by downloading
the user program
- Baud
rate, acceleration rate and -curve rate can be changed
arbitrarily
- Pulse
output frequency up to 1Mpps permits to be sued when
a high resolution microstep driver
|
|
| RC234
Description |
|
The RC-234 is a controller which
can control stepping motor and servo motor by pulse input.
It can control 2 motors simultaneously, and circular and
linear interpolation controls are available in the XY
plane. |
| RC234
Specifications |
| Supply voltage |
18 to 40VDC (Maximum
rated voltage: 40VDC) |
| Supply current |
Less than 100mA
at 24VDC |
| Pulse output
frequency and encoder response |
0.1 to 1 Mpps |
| Counter set
value |
0 to 16,777,215
or -8,388,608 to +8,388,607 (data memory for
the command "2", "A",
"N", etc.) |
| Data memory
position |
0 to 16,777,215
or -8,388,608 to +8,388,607 (Sets by the command
"EP") |
| Number of
profiles |
Up to 1,000 points
(each axis) |
| No. of control
motors |
2 (Simultaneous
control is available) |
| Interface |
Communication
port |
In: 3, Out: 3,
RXD END: 1 |
| Motor control
ports |
Motor 1,2: 10
each (8 each for closed loop servo) Other:
6 |
| User Input/Output
ports |
Input port: 8
Output port: 8 |
| Suitable Encoders |
Open collector
output type |
|
| Communication |
Communication
method |
Current loop
method of RS-232C (use Link Master RC-002) |
| Baud rate |
38400, 19200,
9600, 2400, 1200, 300, (bps) |
| Data bit length |
8 bits |
| Parity |
none |
| Stop bit |
1 bit |
| Back
up for EEPROM |
Memory capacity |
8,000 bytes (approx.
1,500 lines of command level code) |
| Number of porfiles |
1,000 points
(each axis) |
| Memory of command
data in regard to mode setting (Refer to command
"DW") |
| Number of time
to rewrite EEPROM data |
100,000 times
Min. / 1 DATA |
| Number of year
to maintain EEPROM data |
More than 10
years |
| Weight |
approx. 250g |
| Outside dimensions |
27.5 (H) x 105
(W) x 56 (D) mm. |
|
|
|
| |
Click
below to request for a quotation:
|
| |
| Rorze
RC002 StepMotor Controller LinkMaster |
| |
| |
| RC002
Link Master |
| LinkMaster
RC-002 is used in a NetMotion control system to convert
the computer's RS-232C signal to current loop type for
the I/O Master counter/controllers. |
|
| RC002
Specifications |
| Supply
Voltage: |
|
Single
18-40 VDC |
| Power
Consumption:: |
Less
than 20 milliamp at 24VDC |
| Communication
Method: |
Current
loop transmission |
|
Input: |
RXD
input level: Hystersis input of ON @2.2V; OFF@0.6V |
| TXD
max. output current ± 7mA (± 10%) |
| TXD
output voltage ± 11V (± 10%) |
| I/O
Signal from/to I/O: |
RXD
OUT output current 20mA (± 20%) |
| Master: |
TXD
OUT output current 20mA (± 20%) |
| Outside
Dimensions: |
1.1"H
x 4.1"L x 2.2"D |
| |
(27.5H
x 105L x56D mm) |
|
|
Click
below to request for a quotation:
|
|
|
| For
further information, please contact NetMotion, Inc. at 1.800.790.7837
or 510.578.2811 or e-mail sales@netmotion.com
|
| Copyright © 2003 NetMotion,
Inc. |
|
