Fluoroplastic Tube Fittings
<<Return to previous page
Compression Type Fittings
Flare Type Fittings
Reinforced High-Temperature, High-Pressure Fittings
High-Performance, High-Temperature Flare Fittings
  <<Return to previous page     <<Return to HOME Page
 High Temperature Tube Fittings - Reinforced High-Pressure Type 20 Series
 (Internal Diameter Ring System)
 Check to see which best fit your needs. If you have any questions, please call for assistance at 1-800-790-7837 or e-mail sales@netmotion.com
Jigs & Tools (Accessories)
Download Catalog in PDF (11.5Kb)


  • Flare type fitting for high temperature
  • Weld the gripper directly on the flared tube
  • Superior tensile strength & smooth liquid flow
  • Maximum working temperature of 200C
  • Automatic welder is fully equipped Applicable tube size : 1/4"-1"
Piping of Tube to Tube Piping of Tube to Male Pipe Thread
Bulkhead Union
Reducing Union
Union Elbow
Union Tee
Reducing Union Elbow
Reducing Union Branch Tee
Male Connector
Male Elbow
Male Branch Tee
Male Run Tee
Others Piping of Tube to Female Pipe Thread
Female Connector
Female Elbow
Female Branch Tee
Female Run Tee
Jigs & Tools

Multiple Welder for 11 series

  • Flare the PFA tubing and weld the gripper on automatically
  • Can be used in combination with each size.(3mm-25mm or 1/4" to 1")
  • Adopted the Induction Heating system considered thermal efficiency and safety
  • Gas exhausted function is fully equipped

Tube Cutter

  • Cut fluorocarbon resins tubes at a right angle
  • Applicable tube size is from 3mm-25mm 1" to 1/4"
  • Applicable tube materials are PFA, PTFE and FEP

(Manufactured by Hanazono Tools MFG. Co., Ltd.)


Aluminum Handy Wrench

  • Suitable for narrow space
  • Compact size & light weight
  • Easy to grasp & easy to tighten
  • Adjustable wrench 15 type

(Manufactured by Sanki Co., Ltd.)

Click below to request for a quotation:
For further information, please contact NetMotion, Inc. at 1.800.790.7837 or 510.578.2812 or e-mail sales@netmotion.com
Copyright © 2003 NetMotion, Inc.