| RD-053N
|
| Download
Driver Manual |
|
|
 |
Features:
- Better Resolution
- Lower Vibration
- More Torque
|
|
| RD-053N
Specifications TOP
of the PAGE |
| Supply
Voltage: |
|
Single
18-40 VDC |
| Supply
Current: |
|
Approx.
2 times rated coil current per phase |
| Motor
Current: |
|
0.5-3A/
Phase |
| Excitation
Method: |
|
Full
step/ Half Step (4ph or 4-5ph) |
| Drive
Method: |
|
Biipolar,
constant current chopper method with standard wiring |
| Auto
Current Limiting: |
|
1/2
of full current while holding |
| Protective
Circuitry: |
|
Overheat,
low voltage, motor miswiring protection (within 10 minutes) |
| Outside
Dimensions: |
|
2.5"H
x 4.1"W x 2.2"L |
| |
|
(65H
x 105W x56D mm) |
| Weight: |
|
550g
(19.4 oz.) |
| Accel.,
Decel. time: |
|
15-1500ms
by potentiometer |
|
| RD-053N
Description TOP
of the PAGE |
| Compared
to 2-ph stepmotors, 5-ph stepmotors can achieve more torque
at higher speeds with less vibration. NeMotion's 5-phase drivers
were designed to maximize such motors' capabilities. |
|
|
|
| |
| For
further information, please contact NetMotion, Inc. at 1.800.790.7837
or e-mail sales@netmotion.com
|
Click
below to request for a quotation:
(go
to top) |
| RD-A051
|
|
|
 |
Features:
- Built-in Power
Supply
- High Voltage
Capability
- Anti-Resonance
Circuit
- 1.6 inch thin!
|
|
| RD-A051
Specifications TOP
of the PAGE |
| Supply
Voltage: |
|
110
VAC |
| Supply
Current: |
|
4A
max. |
| Motor
Current: |
|
0.3-1.3A/
Phase |
| Excitation
Method: |
|
5-pair
wiring |
| Auto
Current Limiting: |
|
1/2
of full current when motor is stationary |
| Oscillation
Frequency: |
|
200
KPPS max. |
| Protective
Circuitry: |
|
Overheat
and low voltage protection |
| Isolation: |
|
Up
to 1000V |
| Dimensions: |
|
3.2"H
x 1.6"W x 6.1"D |
| |
|
(80H
x 40W x155D mm) |
| Weight: |
|
1.0kg
(5.29 oz.) |
|
| RD-A051
Description TOP
of the PAGE |
|
The
RD-A051 meets the motion control needs of customers with high
voltage, 1-2 axis applications. Though it is compact (only
1.6" wide), this 5-phase driver has a built-in power
supply so that a DC source is not needed. It also has an anti-resonance
circuit which helps to eliminate midrange instability.
Additonal
feature include selectable clock (1 or 2 clock inputs) and
isolated inputs and outputs (photo-coupler).
|
|
|
|
|
|
| For
further information, please contact NetMotion, Inc. at 1.800.790.7837
or e-mail sales@netmotion.com
|
Click
below to request for a quotation:
(go
to top) |
| RD-053MS
|
|
|
 |
Features:
- Selectable Microstep
- High Resolution
- High Torque
- High Speed
- Lower Vibration
- Adjustable Idle
Current
|
|
| RD-053MS
Specifications TOP
of the PAGE |
| Supply
Voltage: |
|
Single
18-40 VDC (including ripple) |
| Supply
Current: |
|
Approx.
2 times rated coil current |
| Motor
Current: |
|
0.3-3.0A/
Phase |
| Microstep
Resolution: |
|
Up
to 400 microsteps/step |
| 1,
2, 4, 8, 16, 32, 64 |
| 2.5,
5, 10, 20, 40, 80, 160, 320 |
| 6.25,
12.5, 25, 50, 100, 200, 400 |
| Excitation
Method: |
|
Microstep
or full step |
| Drive
Method: |
|
Constant
current chopper method |
| Auto
Current Limiting: |
|
0~80%
of rated motor current |
| Protective
Circuitry: |
|
Motor
miswiring, overheating, and low voltage protection |
| Outside
Dimensions: |
|
2.5"H
x 2.2"W x 4.1"L |
| |
|
63H
x 56W x105Lmm) |
| Weight: |
|
550g
(19.4 oz.) |
| Oscillating
Frequency:: |
|
500
kpps |
|
| RD-053MS
Description TOP
of the PAGE |
|
RD-053MS
combines microstepping with 5-phase capability in one ultracompact,
state-of-the-art step motor driver. Using such a 5-phase microstep
driver/motor combination greatly reduces torque ripple with
virtually no resonance effects.
RD-053MS
features selectable microstepping of up to 400 microsteps
per step (22 selections). Motor rotation can be changed for
microstep to full step or vice versa on the fly. The unit
accepts pulse and direction inputs or two clock inputs, one
for each direction.
|
|
|
|
